Unicast Wear Parts

Jaw Crusher Wear Parts in Stock

nicole — Wed, 12 Dec 2012 15:27:47 +0000

Jaw Crusher wear parts are in stock and ready for immediate delivery. Please call if your items are not on this list, more stock items are available!

For more information about Unicast Jaw Crusher wear parts, see the page here.

Pioneer 1536:

Pioneer 1536
12% Manganese		# in Stock
C01106-FIE Moving Jaw	C01108-FIE Stationary Jaw	1 set in stock

Telsmith 1524:

Telsmith 1524
12% Manganese	# in Stock
Stationary/Moving Combo Jaws FIE	2 sets in stock

Metso C125:

Please call if your items are not on this list, more stock items are available!

Pioneer 1536
12% Manganese			# in Stock
4659-0642 Stationary Jaw	4659-0643 Moving Jaw	Upper & Lower Cheek Plates	One set in stock (two of each part)

The post Jaw Crusher Wear Parts in Stock appeared first on Unicast Wear Parts.

Hammermill Wear Parts in Stock

nicole — Wed, 12 Dec 2012 15:15:43 +0000

The following hammermill wear parts are currently in stock. Stocked wear parts can be shipped immediately for the quickest door-to-door delivery times in the industry. Call us today to get started.

For more information on Unicast Hammermill wear parts, visit the page here.

Pennsylvania CD1950 Hammermill

Pennsylvania CD1950 Hammermill
	# in Stock
B28333-28 Triple Shank Hammer	7 sets available

Pennsylvania CD1950 Hammermill: Side Liners, makes one full set

Side Liners, makes one full set
363847-16 Liner, Lower Frame Side
363848-16 Liner, Lower Frame Side
363849-16 Liner, Upper Frame Side
363850-16R Liner, Upper Frame Side
R13808-1 Liner, Frame Side
363852-16 Liner, Frame Side opposite
363106-16 Liner, Frame Filler Lower
363108-16 Liner, Frame Filler Upper

Pennsylvania 1550 Hammermill

Pennsylvania 1550 Hammermill
	# in Stock
528072-28 Hammer (12% Manganese)	55 in stock
Chrome-Moly Steel with Hardsurfacing	21 in stock

FLS Clinker Hammers

FLS Clinker Hammers
	# in Stock
111-20-5-6824-00 Clinker Hammer 12% Manganese with WTiC inserts	30 in stock
111-66-2-1726-00 Clinker Hammer 12% Manganese with WTiC inserts	40 in stock
111-78-3-1821-00 Clinker Hammer 12% Manganese with WTiC inserts	28 in stock

1-250-807-7999

The post Hammermill Wear Parts in Stock appeared first on Unicast Wear Parts.

Cone Crusher Wear Parts in Stock

nicole — Wed, 12 Dec 2012 14:37:48 +0000

The following cone crusher wear parts are currently in stock. Stocked wear parts can be shipped immediately for the quickest door-to-door delivery times in the industry. Call us today to get started.

For more information on Unicast Cone Crusher wear parts, visit the page here.

45 El Jay/Cedarapids Standard:

45 El Jay/Cedarapids Standard
12% Manganese		# in Stock
450-022-0004 Mantle	450-023-0010 Bowl	5 sets available
45D22Mod Stepped Mantle	450-023-0010 Bowl	4 sets available

45 El Jay/Cedarapids Standard
19% Manganese		# in Stock
450-022-0004 Mantle	450-023-0010 Bowl	1 set available
45D22Mod Stepped Mantle	450-023-0010 Bowl	1 set available

54 El Jay/Cedarapids:

54 El Jay/Cedarapids Standard
12% Manganese Coarse		# in Stock
540-022-003 Mantle	540-023-003 Coarse Bowl	1 set available

54 El Jay/Cedarapids Standard
12% Manganese Medium		# in Stock
540-022-0003 Mantle	540-386-0010 Medium Bowl	1 set available

54 El Jay/Cedarapids Standard
19% Manganese Medium		# in Stock
540-022-0003 Mantle	540-386-0010 Medium Bowl	3 sets available

Limited Quantity of Torch Rings and Mantle Caps also available.

Metso HP400 Short Head X-Fine:

Metso HP400 Short Head X-Fine
19% Manganese		# in Stock
5530-8383 Mantle	5520-8387 Bowl	1 set available

1-250-807-7999

The post Cone Crusher Wear Parts in Stock appeared first on Unicast Wear Parts.

Breaker Screen Plates Designed for Easy Removal

nicole — Tue, 21 Jun 2011 18:28:46 +0000

Unicast Breaker Screen Plates are uniquely designed to butt together and bolt to the I-beam with one bolt row only. Each plate is installed independently of its neighbours, for easy removal and replacement of one plate only. Quick and easy, the way it should be. Read more >>

The post Breaker Screen Plates Designed for Easy Removal appeared first on Unicast Wear Parts.

Unicast Tungsten-Carbide Reinforced Hammers a Success

nicole — Thu, 16 Jun 2011 21:03:25 +0000

A hammer built to outlast straight manganese hammers. Reinforced with a strategic arrangement of tungsten-carbide columns inserted into the hammer’s high impact zone, Unicast hammers are built to deliver outstanding wear life for significant cost savings.

After running them for six weeks, a customer in California loved them so much, they ordered ten sets! Read more >>

The post Unicast Tungsten-Carbide Reinforced Hammers a Success appeared first on Unicast Wear Parts.

Single-handedly save your plant 5.1 million dollars in downtime in less than an afternoon . . .

nicole — Tue, 19 Apr 2011 21:04:24 +0000

. . . without using a crane, breaking a sweat, or finishing the job without instant awe and respect. Our promise is huge. Our claim is almost unbelievable. But with $75,000 per hour being the average cost to shut down a plant (as many of you have you told us), every hour that is spent on routine maintenance is an excruciatingly painful blow to your budget.

Whether your valve is within arms reach of the ground (and only a day to maintain) or 200 feet up in the air (as much as a 3-day, 2-man job), we can confidently prove that our diverter valve can be maintained within 4 hours or less by one man without the use of a crane, hoist, or lift, no matter where it’s installed in the pipeline–faster and easier than maintaining the valve you have installed now. Read more about the Unicast Diverter Valve.

The post Single-handedly save your plant 5.1 million dollars in downtime in less than an afternoon . . . appeared first on Unicast Wear Parts.

Are You Buying the Right Wear Parts for Your Application?

nicole — Tue, 12 Apr 2011 20:32:56 +0000

Off-the-shelf wear parts might not be best fit (and could actually cost you more in the long term in maintenance and replacement costs), but customized wear part solutions are engineered with a perfect-fit design and alloy selection to suit your wear part needs and budget.

Our engineers are readily available to discuss your specific wear part needs. They thrive on finding creative solutions to your wear part issues, while respecting your budgetary and time constraints. Unicast is known for innovative solutions-based wear parts that are reliable and easy to install.

The post Are You Buying the Right Wear Parts for Your Application? appeared first on Unicast Wear Parts.

NEW: Diverter Valve 30-Degree Angled Outlet Now Available

nicole — Fri, 05 Nov 2010 22:05:45 +0000

The ever-popular Unicast ceramic-lined diverter valve is now available with a 30-degree angled outlet. Combined with our classic 45-degree angled outlet valve, endless configurations are possible. Learn more about the Unicast Diverter Valve >>

The post NEW: Diverter Valve 30-Degree Angled Outlet Now Available appeared first on Unicast Wear Parts.